Positioning system CLLT/K.
Marca
Spindle drive. Special positioning system for building 3D printers and tripods.
Sizes:
60
Function:
The guide body consists of an aluminium profile with elegantly rounded outer edges. The carriage is moved by a rotating threaded spindle provided with a follower nut. The spindle nuts move along the profile axes through a roller guide system to ensure a smooth, synchronous run. Additional grooves integrated in the profile facilitate the optional fixation of various side frame covers made of glass, plexiglass, aluminium or composite materials.
Fitting position: As required. Max. length 6.000 mm without joints.
Spindle version: Trapezoidal or ball screw spindle, max. length 3000 mm
Carriage support: The carriage runs on 5 rollers which can be adjusted and serviced at each central servicing position. Two grease nipples at the carriage enable relubrication of the positioning system.
![Impressão 3D - CLLK 60 [BAHR]](https://www.fluidotronica.com/image_temp/1280X720_357X200_crop_8718b5f2a9013ce3e020c88441b1d00d.jpg)