Positioning system DLZZ.

Belt drive with two separately driven carriages. This unit consists of a rectangular aluminium profi le with 2 integrated roller guides. The carriage is moved by a belt drive. Each carriage can be moved separately by its own drive. This unit has twin pulleys, which run on separate bearings, and two independent, parallel drive belts, one for each carriage. The openings of the guide body are sealed with 3 stainless steel cover bands to protect the guide from splash water and dust.

Size: 200

Repeating accuracy: ± 0.1 mm
Travel speed: max. 6 m/s

Function:
This unit consists of a rectangular aluminium profile with 2 integrated roller guides. The carriage is moved by a belt drive. Each carriage can be moved separately by its own drive. This unit has twin pulleys, which run on separate bearings, and two independent, parallel drive belts, one for each carriage. The openings of the guide body are sealed with 3 stainless steel cover bands to protect the guide from splash water and dust.

Fitting position:
As required. Max. length 4.000 mm without joints.

Carriage mounting:
By T-slots

Unit mounting:
By T-slots and mounting sets. The linear axis can be combined with any T-slot profile.

Belt type:
HTD with steel reinforcement, no backlash when changing direction, repeatability ± 0,1 mm.

Carriage support:
In the standard version, the carriage runs on 8 rollers which can be adjusted and serviced at a central servicing position. For longer carriages the number of rollers can be increased.