Positioning system DSM-P.

Function like DSM, but with a covered guide profile.

Repeating accuracy: ± 0.1 mm
Travel speed: max. 8 m/s

Function:
This unit consists of a rectangular aluminium profile with 2 integrated rail guidance. The linear motor DSM unit is based on the principle of a linear, synchronous AC motor.
The guiding profile is fitted with permanent magnets as stator (secondary part). The carriage is fitted with the actuator (primary part). The magnetic attraction causes a force between carriage and guiding profile also in the absence of current. This force can be used for the initial tension of the bearings. Several carriages (primary parts) can be driven independently on one guiding profile. A special design of the carriage geometry results in the guiding profile being covered. This prevents small parts from falling into the system, so that clean-room applications are possible.

Fitting position:
As required. Max. length 3.000 mm without joints.

Carriage mounting:
By threaded holes.

Unit mounting:
By T-slots and mounting sets. The linear axis can be combined with any T-slot profile.

Carriage support:
In the standard version, the carriage runs on 4 runner blocks which can be serviced at a central servicing position. For longer carriages the number of runner blocks can be increased.

Repeatability ± 0,05mm mm.
Repeated accuracy max. ± 0,05mm up to 3.000 mm