Positioning system LLZ.

The guide body consists of an aluminium square profile, with an integrated roller guide. The carriage is moved by means of an internal rotating toothed belt. On one end there is a pulley block with coupling claws on both sides (standard version). On the opposite end there is a plate with a retensioning device for the toothed belt.

Belt drive | low mounting height | low-cost system

Size: 60, 80

Repeating accuracy:
± 0.1mm

Travel speed:
max. 4 m/s

Function:
The guide body consists of an aluminium square profile, with an integrated roller guide. The carriage is moved by means of an internal rotating toothed belt. On one end there is a pulley block with coupling claws on both sides (standard version). On the opposite end there is a plate with a retensioning device for the toothed belt.

Fitting position:
As required. Max. length 6.000 mm without joints.

Carriage mounting:
By tapped holes.

Unit mounting:
By T-slots and mounting sets. The linear axis can be combined with any T-slot profile.

Belt performance:
HTD with steel reinforcement, no backlash when changing direction, repeatability ± 0,1 mm.

Carriage support:
The carriage runs on 5 rollers which can be adjusted and serviced at each central servicing position.

Two grease nipples at the carriage enable relubrication of the positioning system.