Marca
The series offers a range of two to twelve sensor signal inputs. More inputs are possible by cascading multiple FIPA sensor relay switch boxes.
. Reduction of necessary inputs on the robot control via bundling (series switching logic AND) of several sensor signals
. Inputs PNP, NPN or potential-free contact (NO or NC)
. Outputs PNP, NPN or potential-free contact (NO)
. Input LEDs for simplified troubleshooting
. Assembly on SLine, MLine or XLine extrusions
. Connection of several switchboxes possible
. Slot nuts and screws for SLine/MLine included in scope of delivery
CONVERT SENSOR SIGNALS INDEPENDENT OF ROBOT CONTROLLER
. Signal converter/signal inverter comes in two types:
- PNP inverter 20.530 for grippers with indirect part detection
- PNP-NPN converter 20.531 for using PNP sensors in NPN circuits
. LEDs to display status and switching state
. Using model 20.530 with grippers with indirect part detection, enables signal activation if a part has been gripped
. Recommended for use with grippers GR04.091, GR04.111A, GR04.130F
. T-coupler connects 2x M8-female with 1x M8-male
. Interconnection of sensor signals on gripper systems
. Please note for 20.525 and 20.525/NPN:
If more than five sensors need to be connected we recommend to use switchboxes such as GS01.006 instead of T-couplers
COLLECTION AND TRANSMISSION OF SENSOR SIGNALS
. Transmits up to twelve sensor signals to the robot controller
. Suitable for PNP/NPN sensors or 2-pole actuators
. LED switching status display
. Signals can be coupled via the external robot controller
. Common output:
- 20.540: 8-pole M12 plug, 1.9 m, open end, wire color to DIN 47100/11.79
- 20.541 and 20.542: 15-pole D-sub-plug, cable length 2 m, open end, wire color to DIN 47100/11.79
