Fastening elements.

. Cylinder screws
. Countersunk screw
. Slide nuts
. Rhomboid T-slot nut
. Pressure plates
. Hexagon nut with flange
. Screws for power lock fastener
. Screws for end cap
. Screws for fastening panel elements

The MiniTec-Profile Power-Lock fastener is not only cost- and time-saving but has also multiple other advantages such as adjustments at a later stage, ESD suitability, ergonomic design and optical qualities.

The power lock fastener is also available with thread-forming screws and is now even quicker. You can screw the connector simply at the front face to the profile. This is easily done with a cordless screwdriver within 3 seconds. No preparation for drills, threads, measurements or planning required.

. Power Lock fastener
. Power Lock fastener N
. Cross connector
. Screw connections
. Bolt and butt fastener

. T-slot bar 90 | steel | 21.1029/0
. T-Slot Bar 90 stainless | stainless steel | 21.0992/0
. T-slot bar 135 | steel | 21.0988/0
. T-slot bar 135 H | stainless steel | 21.0987/0
. Terminal strip 140 | steel | 28.0026/0
. Terminal strip 140 h | stainless steel | 28.0030/0
. T-slot bar 180 | steel | 21.1101/0
. T-Slot Bar 180 stainless | stainless steel | 21.0986/0
. T-slot bar profile | steel | 21.1030/0
. T-slot bar profile H (stainless) | stainless steel | 21.1030/1

Mitre connectors are used especially for high demands on the appearance of a construction. The load capacity of these connections is lower than with our standard connections, which is why these connectors should not be used in heavily loaded constructions. The mitre connectors are used for the frontal connection of profiles at any angle from 30 ° to 180 °. The mitre connectors N are suitable for connecting profiles to the groove of a continuous profile at any angle between 30 ° and 90 °.

. Mitre connector N 30
. Mitre Connector N 45
. Mitre connector 30
. Mitre connector 45

. Mounting bracket 45
. Mounting bracket 30

. Mounting angles profile series 30
. Mounting angles profile series 45

. Multi connector 30 | 22.1140/0

. Adapter 30 x 30 / G32
. Adapter G32 / G32
. Adapter G32 / 30 x 30

. Connecting bar
. Guard unit fixing angle GD-K
. Guard unit fixing angle 19
. Protective field suspension adjustable in angle
. Guard unit fixing angle 45 ST
. Guard unit fixing angle 45 AL

. Connecting plate 90 x 32
. Connecting plate 45 x 90
. Connecting plate 45x90, conductive
. Connecting plate 90 x 90
. Connecting plate 30 x 60
. Angle-sheet VA

Clamping claw | 21.1027/0