Additional indexing plates.

We guarantee the highest precision with regard to axial runout and parts accuracy of all our additional indexing plates. The rotary indexing table and additional indexing plate are measured as a unit and the accuracy is documented in a test certificate.

The fastest, easiest and most secure method is if you send us your dimensioned drawing in DXF format by e-mail.

STATIONARY PLATE
. Standard model with integrated sealing lip between stationary and rotating plate in steel or aluminium
. Delivered with assembly hole and bore pattern (incl. middle bore) appropriate for the table, T-slots possible
. Manufactured in Flatness Quality B including 3 off blanked machining holes
. Please note! All drill holes are blind in order to avoid the accidental blocking of the rotary indexing table

ROTARY PLATE
. Precision machined from aged material in a controlled temperature environment
. Recommended to be manufactured from aluminium to minimise weight
. With appropriate assembly holes and bore patterns (plate is located on the rotary indexing table with two dowel pins)

BASE PLATE
. 3 cable ducts as standard
. Including cut out for drive when mounted on underside, if required
. Prior to positioning your automation equipment please observe the standard hole pattern for fixing the base plate to the base frame
. T-slots possible

GUARANTEED PRECISION
. We guarantee the highest precision for flatness and repeatability.
. Measurements are taken from the indexing dial plate when assembled to the rotary indexing unit. The precision is documented in an inspection certificate.
. Indexing accuracy of hole patterns – up to Ø 1800 mm ± 3” over Ø 1800 mm ± 8”
. Laser measurement of the indexing precision possible
. Indicate machining concerning the bore pattern
. Please forward your drawing by E-Mail in pdf or DXF format

MANUFACTURING NOTE
Dial plates with a diameter more than 550 mm will have 3 auxiliary threads. At stationary plates these threads are closed by plugs. We will inform you about the possible pitch diameter and the thread size if necessary.

DELIVERY TIME
. Depending on the diameter, between four and eight weeks – including drilling work
. Standard dimensions can be supplied at short notice. (outer diameters: 600, 700, 800, 1000, 1100, 1200 and 1600)
. Surface treatment: 1 week additional processing time required
. Aluminium: anodised
. Steel: chemically nickel-plated