GS 140 globoidal cam indexers.

Globoidal cam indexers are typically used for continuously running applications. The cams are designed to match the indexing and idle times without stopping the motor, but can also be used for start-stop applications. These are versatile units suitable for a wide range of applications.

TECHNICAL DATA
. Centre distance: 140 mm
. Maximum recommended equipment diameter: * 675 mm
. Number of stations: 1, 2, 3, 4, 5, 6, 8, 10, 12, 16, 20, 24 | other stations available on request
. Direction of rotation: clockwise, counterclockwise, reversing
. Mounting position: horizontal, vertical, upside down
. Indexing precision: ** 56 arcsec (± 28‘‘; ± 0.027 mm @200 mm radius)
. Repeat accuracy: ** 30 arcsec (± 15’’; ± 0.015 mm @200 mm radius)

LOAD DATA (for the output flange)
. Tilting moment: 825 Nm
. Max. axial force while in motion: 7200 N
. Max. radial force while in motion: 9432 N
Valid as single loads. Combination has to be double checked.

* Max. rotating plate dimension only serves as guideline. Torque demand and required service life should be considered when selecting an indexer model.
** Can be lower depending on number of stops and indexing type.
Optional version – available on request
Shaft output
Hollow output with through hole Ø 25 mm
Customisation on Input – available on request
Mounting of gear motor, sensor, sensor bracket, timing cam, overload clutch.